Carbon buildup is an enemy of any motor, and the Mishimoto Direct-Fit Oil Catch Can system for your 2011+ Ford F-150 is the defense. Modern vehicles use a PCV, or Positive Crankcase Ventilation", system to capture the vapors that escape past the piston rings into the crankcase of your engine and recirculate them back into the intake system to be burned again. While this is much better for the environment, it's not as great for your engine. In doing so, these vapors carry remnants of oil and unburned fuel, which make their way into your intake system, causing multiple problems. The first and largest problem is that the oil particles being carried in these vapors coat your intake system, including the intake manifold and intake valves. Over time, this will gum up and turn into carbon buildup. Direct-injection engines, like the EcoBoost, are especially prone to severe carbon buildup on the intake valves. The second issue is that those oily vapors being introduced back into the cylinder during combustion can reduce the overall octane rating of the fresh fuel being provided, causing pre-detonation and knocking. This is where the Mishimoto Direct-Fit Oil Catch Can system comes into play. By installing our catch can in line with your PCV system, the 50-micron bronze filter captures those oily particles and allows them to condense until they become heavy enough to drip into the canister to be collected instead of flowing back into your engine. This leaves the air flowing back into your intake system clean and ready to be burned again. The catch can mounts with a sturdy 3-mm thick steel bracket in a convenient and serviceable location, allowing you to easily empty the waste oil. The pre-molded hoses with factory style quick-disconnects make installation a breeze, and even fit with the factory engine cover. As with all our products, this catch can is backed by our signature Mishimoto Lifetime Warranty.
- Anodized billet 6061 aluminum construction
- Robust 3mm-thick steel bracket ensures a sturdy mounting point in a serviceable location
- Helps reduce carbon buildup on intake valves
Vehicle Specific
- Ford: F-150 15 - 25 2.7 L Engine, Ford: F-150 18 - 18 3 L Engine, Ford: F-150 18 - 18 3.3 L Engine, Ford: F-150 11 - 25 3.5 L Engine, Ford: F-150 11 - 11 3.7 L Engine
- Ford: F-150 11 - 25 5 L Engine
Attributes:
-
Brand Name: Mishimoto
-
GTIN: 00840197711477
-
Can Finish: Anodized
-
Can Material: 6061-T6 Billet Aluminum
-
Can Outside Diameter: 2.5
-
Can Type: Twist Off
-
Color: N/A
-
Drain Plug Included: Yes
-
Finish: Anodized
-
Height: 3.7
-
Hose Included: Yes
-
Inlet Port Inside Diameter: 0.7
-
Inlet Port Quantity per Can: 1
-
Install Difficulty: 2
-
Interior Baffle: Yes
-
Maximum Can Capacity: 3
-
Mounting Bracket Included: Yes
-
Outlet Port Inside Diameter: 0.7
-
Outlet Port Quantity per Can: 1
-
SellingPoint01: Direct fit for 2011+ Ford F-150 2.7L/3.5L EcoBoost and 5.0L
-
SellingPoint02: Anodized billet 6061 aluminum construction
-
SellingPoint03: Robust 3mm-thick steel bracket ensures a sturdy mounting point in a serviceable location
-
SellingPoint04: Helps reduce carbon buildup on intake valves
-
SellingPoint05: Protects intake system and essential engine components by capturing oil blow-by in the PCV system
-
SellingPoint06: Application-specific pre-molded hoses fit with stock engine cover
-
SellingPoint07: Includes factory-style quick-disconnect fittings for easy and secure installation
-
SellingPoint08: Helps maintain proper octane levels to reduce potential detonation
-
SellingPoint09: Internal air diverter increases air turbulence to improve oil separation
-
SellingPoint10: Simple and quick installation with basic hand tools
-
SellingPoint11: Filter and can are fully serviceable
-
SellingPoint12: N/A
-
SellingPoint13: N/A
-
SellingPoint14: Patent No. US D1,077,006 S
-
SellingPoint15: Mishimoto Lifetime Warranty
-
TechSpec Applications: N/A
-
TechSpec Catch Can Diameter (in): N/A
-
TechSpec Chassis Codes: N/A
-
TechSpec Drain Plug Thread Size: N/A
-
TechSpec Engine Codes: N/A
-
TechSpec Height (in): N/A
-
TechSpec Includes: N/A
-
TechSpec Inlet: N/A
-
TechSpec Installation Notes: N/A
-
TechSpec Material: N/A
-
TechSpec Note: This kit cannot be used in conjunction with MMBCC-F150-11PBE, if you have the 5.0L engine MMBCC-F150-11PBE is a more direct fit for 2011-2014 F150 models
-
TechSpec Outlet: N/A
Extended Information:
-
Country of Origin: China
-
Emissions : 4
Packing Information:
-
Quantity of Each: 1
-
Package UOM: EA
-
Dimension: 5.19 x 5.19 x 5.19 inches
-
Weight: 2.39 POUNDS