Mishimoto MMOC-MUS8-15T Oil Cooler Kit Silver Thermostatic Fits Ford Mustang GT 2015-2017

Nobody likes being sidelined at the track due to high engine oil temperatures. Mishimoto is here to help with a new line of efficient Mustang GT parts. Forced induction setups and some track miles can significantly overheat your oil and wear out your engine, so our engineers have developed an oil cooling solution for your Mustang GT! The Mishimoto engineers designed the heat exchanger for this project from scratch to create the largest oil cooler that we offer, and mounted it in the front of the vehicle where it receives the most airflow. Application-specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. This 2015-2017 Mustang GT (LHD) oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and the Mishimoto Thermostatic Oil Sandwich Plate. As with all our 2015 Mustang parts, the Mishimoto Mustang GT Oil Cooler Kit includes the Mishimoto Lifetime Warranty.

• Innovative bar-and-plate oil cooler mounts in the upper grille, allowing more room for supercharger heat exchangers
• Mounting bracket also serves as an air diversion panel, directing the maximum amount of ambient air through the oil cooler
• Pre-made stainless steel braided oil lines with durable -AN fittings

Attributes:

• Brand Name: Mishimoto
• GTIN: 00748354031126
• Base Height: 0
• Color: Silver
• Core Color: Silver
• Core Height: 0
• Core Row Quantity: 0
• Core Thickness: 0
• Core Type: Bar-and-Plate
• Core Width: 18.5
• Finish: Anodized
• Fluid Capacity: 0
• Grade Type: Performance
• Inlet Fitting Gender: Male
• Inlet Fitting Type: AN Flare
• Inlet Outside Diameter: 0.625
• Install Difficulty: 4
• OptionLabel: Silver, Thermostatic
• Outlet Fitting Gender: Male
• Outlet Fitting Type: AN Flare
• Outlet Outside Diameter: 0.625
• SellingPoint01: Direct fit for the 2015-2017 Ford Mustang GT (LHD)
• SellingPoint02: Innovative bar-and-plate oil cooler mounts in the upper grille, allowing more room for supercharger heat exchangers
• SellingPoint03: Mounting bracket also serves as an air diversion panel, directing the maximum amount of ambient air through the oil cooler
• SellingPoint04: Pre-made stainless steel braided oil lines with durable -AN fittings
• SellingPoint05: Comes with replacement lower radiator hose to bypass the stock fluid-based oil cooler
• SellingPoint06: Removes the stock fluid-based oil cooler for less stress on the engine's cooling system
• SellingPoint07: Billet aluminum thermostatic oil sandwich plate
• SellingPoint08: Increases oil capacity by 1qt
• SellingPoint09: Fits with most aftermarket supercharger kits
• SellingPoint10: Mishimoto Lifetime Warranty
• SellingPoint11: N/A
• SellingPoint12: N/A
• SellingPoint13: N/A
• SellingPoint14: N/A
• SellingPoint15: N/A
• TechSpec Applications: 2015-2017 Ford Mustang GT (Left Hand Drive vehicles only)
• TechSpec Caution: Requires the removal of the stock coolant based oil cooler--Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb
• TechSpec Chassis Codes: S-550
• TechSpec Core Construction: N/A
• TechSpec Core Height (in): N/A
• TechSpec Core Length (in): 18.5
• TechSpec Core Thickness (in): N/A
• TechSpec Engine Codes: 5.0 Coyote
• TechSpec Fluid Capacity (qts): N/A
• TechSpec Includes: Application Specific Mounting Bracket / Air Diversion Shield--Bar and Plate Oil Cooler--2ft 5in Stainless Steel Braided Hose w/ -10AN Fittings--4ft 11in Stainless Steel Braided Hose w/ -10AN Fittings--M22 Thermostatic Sandwich Plate--Application - Specific, M22 x 1.5 extended length center bolt--M20 x -10AN Straight Fittings--1/8-in NPT Plugs--Large O-ring--Lower Radiator Hose w/ worm gear clamps--Mounting Hardware Set--Mishimoto Lifetime Warranty
• TechSpec Inlet: -10AN
• TechSpec Installation Notes: N/A
• TechSpec Note: N/A
• TechSpec Outlet: -10AN
• TechSpec Overall Height (in): N/A
• TechSpec Overall Length (in): 31.7
• TechSpec Overall Width (in): 10.5
• TechSpec Rows: 12
• Width: 10.5

Extended Information:

• Country of Origin: China
• Emissions : Announced

Packing Information:

• Quantity of Each: 1
• Package UOM: EA
• Dimension: 13.98 x 13.98 x 13.98 inches
• Weight: 21.19 POUNDS

PDF: