Mishimoto MMRT-F2D-11KN Aluminum Degas Tank Kit Natural Fits Ford 6.7L Powerstroke 2011-2019

no more trying to shine a flashlight through a muddy tank. Our tanks also incorporate internal baffling to ensure coolant stays where it needs to be, even when the road gets rough. The Mishimoto degas tanks boast a 9.86-percent total increase in coolant capacity over the stock tanks to squeeze even more cooling potential under the hood.The Mishimoto 2011-2019 6.7L Powerstroke Aluminum Degas Tank kit is available in a stealthy micro-wrinkle black powder coat or natural finish to match any custom theme. Of course, these degas tanks are also backed by Mishimoto's Lifetime Warranty. In the unlikely event that you have an issue with either tank, Mishimoto has you, and your 2011-2019 Ford 6.7L Powerstroke, covered.

• Fits 2011-2019 Ford 6.7L Powerstroke
• Includes primary and secondary cooling system degas tanks
• Full-aluminum construction with durable, precision TIG-welds

Attributes:

• Brand Name: Mishimoto
• GTIN: 00840197700020
• Install Difficulty: 4
• OptionLabel: Natural
• SellingPoint01: Fits 2011-2019 Ford 6.7L Powerstroke
• SellingPoint02: Includes primary and secondary cooling system degas tanks
• SellingPoint03: Full-aluminum construction with durable, precision TIG-welds
• SellingPoint04: Increases primary degas tank capacity by 8.8-percent
• SellingPoint05: Increases secondary degas tank capacity by 15.65-percent
• SellingPoint06: Internal baffles keep coolant near overflow port during aggressive driving, preventing air entry into coolant system
• SellingPoint07: Sight glasses allow for quick and easy reading of coolant level
• SellingPoint08: Secondary degas tank includes removable fittings for installation on both 2011-2016 and 2017+ models
• SellingPoint09: Available natural finish makes customization easy through powder-coating, anodizing, or hydro-dipping
• SellingPoint10: Fit with stock caps
• SellingPoint11: Available in natural or micro-wrinkle black powder coated finish
• SellingPoint12: Mishimoto Lifetime Warranty
• SellingPoint13: N/A
• SellingPoint14: N/A
• SellingPoint15: N/A
• TechSpec Applications: 2011-2019 Ford F-250 Super Duty 6.7L Powerstroke--2011-2019 Ford F-350 Super Duty 6.7L Powerstroke
• TechSpec Chassis Codes: F-250--F-350
• TechSpec Engine Codes: 6.7L Powerstroke
• TechSpec Fluid Capacity (gal): 10.75
• TechSpec Height (in): N/A
• TechSpec Includes: (1) Mishimoto Aluminum Primary Degas Tank w/ Sight Glass--(1) Mishimoto Aluminum Secondary Degas Tank w/ Sight Glass--(1) Removable Quick-Disconnect Fitting (2011-2016 Models)--(1) Removable Hose Barb (2011-2016 Models)--(2) Threaded Plugs (2017+ Models)--(1) Lower Coolant Hose--(2) Mounting Brackets--(2) Worm Gear Clamps--(2) Notecards--Mounting Hardware--Mishimoto Lifetime Warranty
• TechSpec Installation Notes: 22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs (3NM).
• TechSpec Material: N/A
• TechSpec Note: Cutting of the stock battery tray is required to remove the stock degas tank from the battery tray. Please see installation guide for cut instructions. If your stock battery tray cannot be reused, a new degas tank and battery tray can be purchased from Ford under part number: BC3Z8A080H (2011-2016) or HC3Z-8A080-D (2017-2019)-------- Mishimoto does not provide powder coating, anodizing, or hydro-dipping services for this product. Customers who purchase the natural finish must source these services independently. The natural finish may show some surface imperfections that will not affect powder coating or other customization.----After a few heat cycles, Mishimoto recommends checking the sight glass on the side of the degas tank to confirm proper coolant level.
• TechSpec Width (in): N/A

Extended Information:

• Country of Origin: China
• Emissions : Emissions Compliance Exempt

Packing Information:

• Quantity of Each: 1
• Package UOM: EA
• Dimension: 21.68 x 21.68 x 21.68 inches
• Weight: 47.97 POUNDS