Mishimoto MMSBH-RX8-04 Oil Cooler Line Stainless Steel Primary Fits Mazda RX-8 2004-2008

The Mazda RX8 has a high-winding rotary engine capable of easy reaching 9,000RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine's oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. The most frequent line to corrode is located on the left hand side of the car near the front suspension assembly. The design of the vehicle and location of the line are apt to collect dirt and road salt from winter. With the Mishimoto replacement oil line, not only is this problematic line replaced, It's replaced with a full braided stainless steel oil line and aluminum M18 -- 10AN banjo fittings that will not corrode or break down over time. The oil line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. Keep you RX8 protected and running smooth! As with all our products, this kit includes the Mishimoto Lifetime Warranty.

• Direct-fit replacement for the 2004-2008 Mazda RX-8
• Premade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line
• Kit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation

Attributes:

• Brand Name: Mishimoto
• GTIN: 00748354021875
• End 1 Type: -10AN
• End 2 Type: -10AN
• Grade Type: Performance
• Install Difficulty: 4
• Length: 28
• Maximum Pressure: 1000
• SellingPoint01: Direct-fit replacement for the 2004-2008 Mazda RX-8
• SellingPoint02: Premade braided stainless steel oil line and aluminum fittings replace corrosion-prone stock rubber line
• SellingPoint03: Kit comes with the braided stainless steel line, M18 banjo bolts, and oil seals for a trouble-free installation
• SellingPoint04: Mishimoto Lifetime Warranty
• SellingPoint05: N/A
• SellingPoint06: N/A
• SellingPoint07: N/A
• SellingPoint08: N/A
• SellingPoint09: N/A
• SellingPoint10: N/A
• SellingPoint11: N/A
• SellingPoint12: N/A
• SellingPoint13: N/A
• SellingPoint14: N/A
• SellingPoint15: N/A
• TechSpec Compatible Fluids: N/A
• TechSpec Fitting Angle: N/A
• TechSpec Inlet: N/A
• TechSpec Inner Material: N/A
• TechSpec Max Fluid Pressure (PSI): N/A
• TechSpec MaxFluidTemperature (F): N/A
• TechSpec Note: This oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb
• TechSpec Outlet: N/A
• TechSpec PurchaseIncludes: 2-ft 4-in Stainless Steel Braided Hose w/ 90 Degree -10AN Fittings--M18 x -10AN Banjo Bolts w/ Dowty Oil Seals--Mishimoto Lifetime Warranty
• Type: Stainless Steel
• Universal Or Specific Fit: Specific

Extended Information:

• Country of Origin: CN
• Emissions : 4

Packing Information:

• Quantity of Each: 1
• Package UOM: EA
• Dimension: 6.19 x 6.19 x 6.19 inches
• Weight: 1.14 POUNDS