{"product_id":"mishimoto-mmsbh-rx8-04k-oil-cooler-line-kit-stainless-steel-fits-mazda-rx-8-2004-2008","title":"Mishimoto MMSBH-RX8-04K Oil Cooler Line Kit  Stainless Steel  Fits Mazda RX-8 2004-2008","description":"The Mazda RX8 has a high-winding rotary engine capable of easy reaching 9,000RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine's oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. This full kit from Mishimoto replaced all oil lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With the Mishimoto replacement oil line kit, all oil lines between the engine, and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. The oil line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep you RX8 protected and running smooth! As with all our products, this kit includes the Mishimoto Lifetime Warranty.\r\n\u003cul\u003e\t\u003cli\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003c\/li\u003e\r\n\t\u003cli\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003c\/li\u003e\r\n\t\u003cli\u003eOil lines come prelabeled for easy identification\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003ch3\u003eAttributes:\u003c\/h3\u003e\r\n\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\r\n\u003cli\u003e\n\u003cb\u003eBrand Name: \u003c\/b\u003eMishimoto\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eGTIN: \u003c\/b\u003e00748354021882\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eEnd 1 Type: \u003c\/b\u003e-10AN\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eEnd 2 Type: \u003c\/b\u003e-10AN\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eGrade Type: \u003c\/b\u003ePerformance\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eInstall Difficulty: \u003c\/b\u003e4\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eLength: \u003c\/b\u003e28\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eMaximum Pressure: \u003c\/b\u003e1000\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint01: \u003c\/b\u003eDirect fit for the 2004-2008 Mazda RX-8\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint02: \u003c\/b\u003ePremade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint03: \u003c\/b\u003eFull kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint04: \u003c\/b\u003eOil lines come prelabeled for easy identification\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint05: \u003c\/b\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint06: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint07: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint08: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint09: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint10: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint11: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint12: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint13: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint14: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eSellingPoint15: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eTechSpec Compatible Fluids: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eTechSpec Fitting Angle: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eTechSpec Inlet: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eTechSpec Inner Material: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eTechSpec Max Fluid Pressure (PSI): \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eTechSpec MaxFluidTemperature (F): \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eTechSpec Note: \u003c\/b\u003eThis oil line kit is designed to work with the stock oil coolers located in the front bumper. Supplied M18 banjo bolts and M18 straight fittings are designed to attach to your stock oil cooler. Make sure to check oil levels after installation and add oil if needed.----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eTechSpec Outlet: \u003c\/b\u003eN\/A\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eTechSpec PurchaseIncludes: \u003c\/b\u003e2ft, 4in Stainless Steel Braided Hose with 90 Degree -10AN Fittings--4ft, 8in Stainless Steel Braided Hose with 90 Degree -10AN Fittings--3ft, 4in Stainless Steel Braided Hose with 45 Degree and Straight -10AN Fittings--2ft, 2in Stainless Steel Braided Hose with 90 Degree and Straight -10AN Fittings--M18 x -10AN Fittings w\/ Dowty Oil Seals--M18 x -10AN Banjo Bolts w\/ Dowty Oil Seals--10AN - 10AN Male Connector--Mishimoto Lifetime Warranty\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eType: \u003c\/b\u003eStainless Steel\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eUniversal Or Specific Fit: \u003c\/b\u003eSpecific\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003ch3\u003eExtended Information:\u003c\/h3\u003e\r\n\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\r\n\u003cli\u003e\n\u003cb\u003eCountry of Origin: \u003c\/b\u003eCN\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eEmissions : \u003c\/b\u003eEmissions Compliance Exempt\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003ch3\u003ePacking Information:\u003c\/h3\u003e\r\n\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\r\n\u003cli\u003e\n\u003cb\u003eQuantity of Each: \u003c\/b\u003e1\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003ePackage UOM: \u003c\/b\u003eEA\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eDimension: \u003c\/b\u003e11.38 x 11.38 x 11.38 inches\u003c\/li\u003e\r\n\u003cli\u003e\n\u003cb\u003eWeight: \u003c\/b\u003e5.28 POUNDS\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\r\n\u003cdiv id=\"sema-product-fitment\" class=\"product__accordion accordion fitment\"\u003e\u003c\/div\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":48509497802980,"sku":"FLDS-MMSBH-RX8-04K","price":537.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/7134\/1028\/files\/MMSBH-RX8-04K_1.jpg?v=1773782848","url":"https:\/\/coastal-diesel.com\/products\/mishimoto-mmsbh-rx8-04k-oil-cooler-line-kit-stainless-steel-fits-mazda-rx-8-2004-2008","provider":"Coastal Diesel \u0026 Performance","version":"1.0","type":"link"}